Exposed Aggregate Driveways
Exposed aggregate driveways on the Sunshine Coast. Tough, non-slip and hides the dirt, in a stone blend to suit your home. Get your free quote today.
Learn More →
Driveway Removal & Replacement in the Sunshine Coast, QLD
Cracked or sunken driveway? We rip it out and pour a new one across the Sunshine Coast. Better street appeal, no more patch-ups. Get a free quote.
Request a Free Quote
Driveway Removal and Replacement for Sunshine Coast Homes
Patching can handle a small, isolated defect, but it will not fix a slab that is moving or breaking across several areas. Replacement often makes better sense when your driveway has wide structural cracks, sunken panels, exposed reinforcement, poor drainage, or repairs that keep failing. Deep oil staining and worn concrete can also leave the entrance looking tired, even after cleaning. We can redesign the driveway when it no longer provides enough turning room, parking space, or clearance for the household’s vehicles.
We saw cut where a clean separation is needed, then use excavation equipment to break up and remove the old concrete. Once the slab is gone, we inspect the exposed subgrade, remove unsuitable material, correct soft spots, and compact a suitable road base. We then set formwork, install reinforcement mesh, check drainage falls, and place the new concrete before finishing the surface, cutting control joints, and managing curing. This groundwork matters in the Sunshine Coast, where heavy rainfall and storm runoff can wash through weak bases, while high humidity and intense sun affect concrete placement and curing. Sandy coastal ground, clay soils further inland, and salt-laden coastal exposure each call for site-specific base preparation, drainage, reinforcement, and curing methods.
Finish options include plain concrete, Exposed Aggregate Driveways, and Coloured, Stamped & Stencilled driveways. The right choice depends on the traction you need in wet weather, how much maintenance you prefer, the home’s exterior, and your budget. Request a quote from Sunshine Coast Concrete Driveways so we can inspect access, demolition volume, disposal requirements, driveway size, drainage, reinforcement, finish choice, and site preparation before pricing the work. Call us on (07) 4133 5405 to arrange an assessment. You can also learn more about all our Concreting services in the Sunshine Coast.
- Saw cutting and controlled removal of the existing slab
- Excavation and responsible concrete disposal planning
- Subgrade inspection and correction of soft spots
- Compacted road base suited to sandy or clay ground
- Formwork and reinforcement mesh installation
- Drainage falls planned for heavy Sunshine Coast rainfall
- Control joints and site-appropriate curing
- Plain, exposed aggregate, coloured, stamped, or stencilled finishes
Concrete Driveway Removal and Replacement Process
From saw cutting and excavation to reinforcement, pouring, jointing and final clean-up.
Step 1: Step 1: Inspect and Mark the Existing Driveway
We inspect cracks, settlement, drainage, slab thickness, access, nearby walls, underground services, kerbs and the garage threshold. We then mark safe demolition boundaries and saw cut any sections that need a clean edge against concrete that will remain.
Step 2: Step 2: Break Up and Remove the Old Concrete
We break the slab with suitable demolition equipment, then lift sections using an excavator or skid steer where access allows. Reinforcement is separated, and the concrete is loaded for removal while we protect nearby walls, kerbs, garden beds and landscaping.
Step 3: Step 3: Rebuild the Driveway Base and Reinforcement
We excavate failed material and remove soft or waterlogged areas caused by poor drainage or heavy rainfall. Suitable road base is placed and compacted in layers, falls are set, formwork is built, and reinforcement mesh is supported on chairs. Dowels or isolation joints are added where the design requires them.
Step 4: Step 4: Pour, Finish and Cure the New Driveway
We place the concrete and screed it to the planned levels before applying the chosen plain, coloured, stencilled or exposed aggregate finish. Control joints are formed or cut to manage movement, and the slab is cured. Access stays restricted until the concrete has gained enough strength for the intended vehicle load.
Benefits of Replacing a Failed Concrete Driveway
Improve drainage, access and presentation while correcting cracks, movement and poor base preparation.
A Stable Driveway Without Rocking or Sunken Sections
Removing the failed slab lets us rebuild soft areas with compacted road base before pouring a reinforced concrete surface. Your vehicles get a firm and even surface without sharp crack edges, rocking sections, or depressions returning after heavy Sunshine Coast rain.
Better Stormwater Drainage in Wet Sunshine Coast Weather
Corrected falls guide rainwater away from the garage, house slab, and known low spots. That means fewer puddles and less mud tracked indoors during humid conditions, downpours, and severe storms.
Cleaner Access and More Useful Parking Space
A continuous new surface is easier to sweep and pressure clean, with no broken joints collecting weeds, dirt, or leaves. We can also reshape or widen the layout for larger vehicles, clearer parking, and better everyday access.
Concrete Driveway Rebuilding Capabilities Across the Sunshine Coast
Professional Service
Our team provides driveway removal & replacement focused on your property and priorities.
Responsive Team
We make it easy to ask questions, request a quote, and plan the work.
Clear Quotes
We explain the proposed work so you know what the quote covers.
Driveway Removal and Replacement Questions for Sunshine Coast Properties
Common questions answered
How much does concrete driveway removal and replacement cost on the Sunshine Coast?
The price depends on the slab area and thickness, reinforcement, demolition access, tipping or concrete recycling, ground repairs, drainage, concrete volume and your chosen finish. Kerbs, crossovers and difficult excavation can also affect the cost, so request an itemised quote from Sunshine Coast Concrete Driveways after we inspect the site.
How long does it take to remove and replace a concrete driveway?
The schedule covers saw cutting and demolition, excavation, base repairs, formwork, reinforcement, concrete placement, finishing and curing. Heavy Sunshine Coast rain, site access, concrete availability and hidden subgrade damage can affect each stage, so we confirm timing after inspecting your driveway.
Can you pour new concrete over my cracked driveway?
An overlay is usually unsuitable when the old slab has structural cracks, movement, poor drainage or a failed subgrade because those defects can transfer through the new concrete. Full removal lets us inspect and repair the base, correct drainage problems and rebuild the driveway with suitable reinforcement and joints.
When can cars use my newly replaced driveway?
Pedestrian access and vehicle access require different levels of concrete strength. The concrete mix, slab design, curing conditions, humid or wet weather and the weight of your vehicles all affect reopening advice, so follow the project-specific instructions we provide.
What maintenance and warranty details should I ask for with a replacement driveway?
Ask how to clean the selected finish, treat oil promptly, keep drains clear and monitor control joints; gentle washing is safer than harsh acids that can damage concrete or sealer. Any applicable warranty scope, maintenance conditions and exclusions should be clearly confirmed in the written quote from Sunshine Coast Concrete Driveways.
Driveway Removal & Replacement Service Areas
We provide Driveway Removal & Replacement throughout the Sunshine Coast, QLD and surrounding suburbs.
Don't see your area? Contact us to check if we service your location!
View All Areas